Nederlands Engels Duits Frans
Pulsar Quantum Lite XQ23V Warmtebeeld kijker OCCASION

Warmtebeeld Handkijker



€ 1.599,00
€ 795,00
Prijs per stuk



Pulsar Quantum Lite XQ23V Warmtebeeld kijker OCCASION 

Deze warmtebeeld handkijker is door Pulsar volledig gecontroleerd en gebruiksklaar gemaakt. 

Degree of protection IPX4: Protected against water sprinkling 
Digital zoom: Digital zoom
Frost-resistant: Frost resistant


  • Refresh rate: 50 Hz
  • Range of detection: 800 m
  • Magnification 1,8 ... 7,2х
  • Two-second start-up time
  • 7 color palettes

Colour palettes

Quantum offers a choice of 7 colour palettes for captured by objective lens image, monochrome (usual “hot white”, “hot black”) and colour highlighting the hottest and coldest areas with different colours

Rangefinding reticle

Quantum has a stadiametric rangefinder performed in the shape of rangefinding reticle which enables distance measuring to observed objects with known height (deer - 1,7m; boar – 0,7m; hare – 0,3m) with a sufficient precision. 

High image frequency

Due to the high image frequency (50 Hz) it is comfortable to use thermal camera dynamically (during rapid moving of observer or object of observation).

Operating modes

The Quantum suggests three operating modes, each designed to deliver best possible image in specific viewing conditions. The modes are as follows: “City” (enhanced contrast), “Forest” (low contrast) and “Identification” (improved rendering of hot objects’ details).

Quick start-up time

The Quantum thermal scopes feature short start-up time (2 seconds) from the push of a button to full operational status. This is one of the best results in its class.    

Display OFF

When it is necessary to temporarily stop observation the user can apply DISPLAY OFF function. It provides the necessary level of camouflage (no light from the eyepiece of the device) between observation sessions as well as the fast restart of observation (when display is turned off, all other systems are working; for normal operation it is enough just to power on the display again).


Power saving mode

Disabling the video output module in the Quantum thermal scopes increases self-contained operating time on a set of batteries or external power supply.


The Quantum suggests three calibration modes: silent manual mode (“M”), automatic (“A”) and semiautomatic (“H”). The “A” mode implies calibration without user participation (process initiation (actuation of the shutter) takes place automatically). In the “H” mode the user decides on his own if calibration is required based on the image quality. Button “Cal” is pressed in this mode. Manual calibration (“M”) is carried out by pressing the button when the lens cap is closed. The “M” mode is recommended for hunting due to silent operation.


The body of fiberglass reinforced plastic is able to effectively withstand impact, moisture and dust which allows the units to be used in extreme conditions. The rubber armouring ensures secure grip of the unit.

Wireless remote control

The wireless remote control allows basic operations (On/Off, Calibration, Digital Zoom) to be fulfilled without resorting to standard controls.

Wide range of operating temperatures

Quantum imaging scopes are effective for the use in low temperatures (-25°C) thanks to the frost-resistant OLED display employed in the unit (image remains the same as when viewing at positive environment temperature).

Brightness and contrast control

The control wheel located next to the lens allows the user to setup brightness and contrast most appropriate for specific situation.  

Self-contained power supply

The Quantum is powered with four AA size (rechargeable) batteries. The batteries are stored in a container which is then placed in a battery compartment of the unit.      

Video output

All Quantum models are equipped with an analog video output to enable connection of external recording equipment or transmitting image to the display.

External power supply

Operation time of the unit can be significantly increased thanks to the use of external power supplies (for example, Pulsar EPS3/EPS5) that can be connected with a special jack. When used in frosty weather, the power supply can be stored under the clothes.

User interface

Actual information about the status of the thermal imaging device, depicted in the form of blue icons and numbers, is located on the data panel in the lower portion of the screen, and does not interfere with the image observed. When switching between various functions (digital zoom, colour inversion, brightness/contrast settings), the respective large sized icon appears in the right upper portion of the screen


Main control functions (turning on and off the unit, sensor calibration, colour inversion/digital zoom) are carried out with the buttons on the upper panel. The size and location of the buttons are customised for comfortable use both with a gloved or bare hand. Brightness and contrast are set up with the controller wheel located next to the objective lens.

Extern accu-pack
Extern accu-pack om de inzetduur van de Quantum te verhogen.
Pack wordt geleverd met 220/230 Volt lader en auto acculader, te bevestigen aan de weavermount (zijkant)
  • EPS-3. capaciteit 2,4 Amp. Gewicht 0,23 kg. Inzetduur ca. 16-18 uur. Prijs € 99,00 incl. BTW
  • EPS-5. capaciteit 5.0 Amp. Gewicht 0,35 kg. Inzetduur ca. 20-22 uur. Prijs € 119,00 incl. BTW
Pulsar DNV Accu Pack
Pulsar DNV Accu Pack is te gebruiken in combinatie met de Quantum en DFA 75/DN55 modellen.
Deze accupack past op de plek van de normale batterijhouder.
Battery type: Ni-MH (Nickel metal hydride) - Capaciteit: 2.3 V - laadtijd: 6 uur.
Vervang nu de batterijen in een of meerdere accu pack(s)
  • Geen problemen meer met het verwisselen van batterijen op de hoogzit.